詳細介紹：

產品圖片

一、產品簡介Product introduction：

專為圓形產品印刷而設計,主要適用于離心管與醫療刻度管

主傳動采用歐洲名牌傳動器材，輔以高速精密間隙分割器，實現部分精確分度傳動，使整機運行平穩可靠，印刷速度2400-3600pcs/hr

整機控制采用國際名品PLC控制及設置簡便快捷的觸摸屏操作，輕易實現人機對話，操作更加得心應手。

油墨固化可采用電子式紫外線固化或紅外線干燥，在保證性能穩定和節省電能的情況下，可獲得更加優秀的固化效果。

具有離子風除塵、無件不印刷、氣壓過低報警、廢料/錯料等自動報警自動檢測功能。

全自動上料系統與卸料機械手裝置確保了印刷的連續與穩定，也盡可能避免了在印刷過程中造成承印物表面的刮傷，更加保障了作業員的安全操作。

Designed for circular printing, mainly for medical scale tubes

The main transmission adopts the European famous brand transmission equipment, supplemented

by high speed precision gap splitter, so as to achieve the accurate degree of transmission, make the

whole machine running more stable and reliable, printing speed can be as high as 2400-360000pcs/hr

Machine control using the international name PLC control and set up a simple and quick touch

screen operation, easy to achieve human-computer dialogue, the operation is more handy.

Ink curing can be cured by electronic UV or infrared drying, in the case of ensuring stable

performance and energy saving, can get a better curing effect.

With ion wind dust, no non printing, low pressure alarm, scrap / wrong material, such as automatic

alarm automatic detection function.

Automatic feeding system and unloading manipulator device to ensure the continuity and stability

of the printing, but also as far as possible to avoid the printing process caused the surface of the

substrate scratch, more to protect the safety of the operator.

二、機器配置特色Features of Machine Configuration：

1、7寸觸摸屏歐姆龍（日本）

2、PLC 歐姆龍（日本）或松下

3、轉盤運轉由德士分割器驅動（日本三共）

4、印刷機構全機械連動,加光電（德國）

5、左右滾珠絲桿(運行更平穩)（日本）

6、15軸管位座 ,緊密NSK軸承,進口硬軸組成（日本）

7、主傳動由意大利摩多利減速機配電機，歐姆龍變頻器控制（意利與日本）

8、滾珠絲桿與導軌均采用日本THK品牌（日本）

9、火焰（JenwaL）可以反饋煤氣信號

10、氣動元件 （日本SMC或亞德客）

11、產能：2400-3600pcs/hour

1.7 inch touch screen Omron (Japan)

2.PLC Omron (Japan) or Panasonic

3. turntable operation driven by Tex splitter (Sankyo)

4.All-mechanical linkage of  printing agencies, plus photoelectricity (Germany)

5. left and right bead rod (more stable)(Japan)

6.15 Shaft seat, tightly NSK bearing, imported hard shaft composition (Japan)

7. main drive is controlled by Italian Modoli Reducer Distribution Machine, Omron Inverter (Italy and Japan)

8. ball wire rod and guide rail are adopted Japanese THK brand (Japan)

9. flame (JenwaL) can feedback gas signal

10. pneumatic component. (SMC or Yadek, Japan)

11. Capacity: pcs/hour 2400-3600

三、技術參數（Specifications)

印刷尺寸范圍（Printed Object Dimension)      Φ：8mm-28mm L:20mm-200mm

電源要求（Power Supply)                   380V 3Phase 50HZ

氣源要求(Air Supply)                         6-8Bar 

UV燈功率（UV lamp power）                      3.6kw

速度（Speed)                           2400-3600Pcs/hr

外形尺寸（dimension）                 (L)3000x(W)1700x(H)1900 mm

總功率（Total Power）                         4.6Kw

重量（Weight）                              2200kg